Now that the driver is online and compiled, I have a lot of questions on how to install it… and run it with ccv or tbeta or anysoftware that send over tuio/osc…
First I want to thank Daniel D for his wonderful work on this driver…
SEE PREVIOUS POST TO DOWNLOAD THE DRIVER
So when you have downloaded the archive, extract everything in a folder.
Go into Main Source, Multitouch Driver, and then again in Multitouch.Driver.
IF you’re working under x64, go into the x64 folder, right click on the devcon.exe file, select properties, go in the compatibility tab, select “launch as administrator” and hit OK, then go back to the previous folder.
Then right click on the x32 or x64 (depends of your configuration) folder while holding SHIFT, then click on open a windows command here. If you don’t have this open in the right click menu, you can also open a commande line window and navigate to this foler.
type in “install driver.cmd” don’t forget the ” ”
(an other window opens)
Allow the driver to be installed.
When the second box closes, close the first one.
Now go in the Windows device manager.
Under Interactions Devices, find the Universal software HID device
Right click on it, disable, accept, DON’T RESTART
Wait a second,
Right click on it, enable…
Close the device manager.
You can skip this it you don’t want the visual pointer : Now go in the Pen and Touch Configuration panel. go in the touch tab, enable everything (not necessarily the visual pointer as you wish…)… close the box by pressing OK
Now back in the Main Source folder. Go into the Output folder.
Run multitouch.service.console.exe (a command box opens)
Then run configuration service wpf.exe (the exe with a hand as an icon), click on tuio, click on the big blue arrow, click on restart service, close the window.
Close the multitouch.service.console.exe
NOW HOW TO RUN IT :
launch ccv or tbeta, configure it si it can see only your finger, do the calibration… then enable sending tuio (the one that sends over the 3333 port)
run from main source/output the multitouch.service.console.exe
run from the same folder the multitouch.driver.console.exe
now it should work, you should be able to control Seven with your touch…